In the field of industrial surface treatment, the pursuit of environmentally friendly and efficient abrasives has always been a goal for the industry. As a new type of surface treatment material, sharp-edged steel grit is gradually becoming a favorite in the industry due to its excellent environmental characteristics and treatment effects.

1.Eco-friendly Material of Sharp-edged Steel Grit

Sharp-edged steel grit is produced through a special process using scrap steel materials, aligning with the environmentally friendly principle of waste recycling. According to a report by the Institute of Scrap Recycling Industries (ISRI), the production of each ton of sharp-edged steel grit can reduce carbon dioxide emissions by approximately 1.8 tons, equivalent to reducing the annual carbon emissions of 0.5 cars.

2.Reduction in Dust and Harmful Substance Emissions

Compared with traditional blasting materials, sharp-edged steel grit generates 30% less dust during the blasting process. According to standards set by the Occupational Safety and Health Administration (OSHA), dust concentration in the workplace should be controlled below 5 milligrams per cubic meter. The use of sharp-edged steel grit can effectively lower dust concentrations at the worksite, reducing the risk of occupational diseases.

3.Energy Consumption and Carbon Footprint Reduction

The production process of sharp-edged steel grit consumes less energy. Data from the U.S. Department of Energy (DOE) indicates that the energy consumption for producing sharp-edged steel grit is 40% lower than that of traditional abrasives. This means that for every ton of sharp-edged steel grit produced, about 500 kWh of electricity can be saved, reducing carbon emissions by approximately 0.8 tons.

4.Enhanced Operational Efficiency and Economy

The hardness and particle shape of sharp-edged steel grit make it more efficient in surface treatment, reducing material usage and operation time. Tests conducted by the Industrial Abrasives Association (IWA) show that the blasting efficiency with sharp-edged steel grit is over 20% higher than that with traditional abrasives, while also decreasing material consumption and lowering operational costs.

5.Reduced Wastewater Treatment Burden

Wastewater treatment after using sharp-edged steel grit is simpler due to its stable chemical properties and insolubility in water. The treated wastewater contains low levels of heavy metals, reducing the complexity and cost of wastewater treatment. Research published in the journal Environmental Science & Technology (EST) indicates that the cost of wastewater treatment for blasting processes using sharp-edged steel grit is about 20% lower than that for traditional abrasives.

Sharp-edged steel grit, as an environmentally friendly surface treatment material, not only reduces environmental pollution but also improves operational efficiency and economic benefits. With increasingly stringent environmental regulations and the green transformation of industrial production, the advantages of sharp-edged steel grit will become even more evident.

Your Most Thoughtful Expert in Anti-corrosion and Rust Removal!

Consultation Hotline: 400-038-8928

Telephone: 027-84841595

Steel Shot Sister Hotline: 13016427928

Official Website:www.malgw.com